pp塑料板全称聚丙烯塑胶管性能***点

Properties and characteristics of PP plastic pipe

pp塑料板全称聚丙烯塑胶管，无毒、卫生、耐高温且可回收利用，主要应用于建筑物室内冷热水供应系统，也广泛适用于采暖系统。设计以新颖的结构壁管的形式生产双壁波纹管，改变了传统pp塑料板材实壁结构与同口径实壁管材相比降低了重量和成本。管材表观波纹形设计成正弦波纹形状，与传统的矩形波纹相比，提高了产品的环刚度。

PP plastic board, full name of PP plastic pipe, is non-toxic, sanitary, high temperature resistant and recyclable. It is mainly used in the indoor cold and hot water supply system of buildings and also widely used in heating system. The double wall corrugated pipe is designed to be produced in the form of new structural wall pipe, which changes the traditional solid wall structure of PP plastic plate and reduces the weight and cost compared with the same caliber solid wall pipe. Compared with the traditional rectangular corrugations, the apparent corrugations of pipes are designed to be sinusoidal, which improves the ring stiffness of products.

***点：

Characteristic:

pp塑料板长久的使用寿命，在额定温度、压力状况下，pp塑料板可安全使用50年以上；

PP plastic plate has a long service life. Under rated temperature and pressure, PP plastic plate can be used safely for more than 50 years;

pp塑料板卓越的耐腐蚀性能，能耐***多数化学物品的腐蚀，可在很***的范围内承受PH值范围在1-14的高浓度酸和碱的腐蚀；

PP plastic plate has excellent corrosion resistance and can withstand the corrosion of most chemicals. It can withstand the corrosion of high concentration acid and alkali in the pH range of 1-14 in a large range;

pp塑料板较高的刚度，由于加入了玻纤增强材料使pp塑料板不易变形；

Because of the high rigidity of PP plastic plate, it is difficult to deform because of the glass fiber reinforced material;

pp塑料板耐热保温节能，***使用温度90度，该产品的导热系数仅为钢管的1/200，故有较***的保温性能；

PP plastic board is heat-resistant and energy-saving, with a maximum use temperature of 90 degrees. The thermal conductivity of the product is only 1 / 200 of that of steel pipe, so it has better thermal insulation performance;

pp塑料板可靠的连接性能，pp塑料板热熔接口的强度高于管材本体，接缝不会由于土壤移动或载荷的作用而断开；

The strength of the hot-melt interface is higher than that of the pipe body, and the joint will not be broken due to the soil movement or load;

pp塑料板******的施工性能，pp塑料板质轻，焊接工艺简单，施工方便，工程综合造价低。

PP plastic plate has good construction performance, light weight, simple welding process, convenient construction and low comprehensive engineering cost.